Guangzhou Jinwei Chemical Co., Ltd

Automotive Refinish Paint One Stop Supplier. Professional Team, Perfect Service!

Base Coat Painting

Base Coat Painting

1K basecoat High quality,multiple layers basecoat system with metal colour basecoat for high class cars and commercial vehicles. 1.The result will be perfect if the users use Roch® brand supporting thinners. 2.Light...

Send InquiryChat Now
Product Details

PRODUCT DESCRIPTION

A solventborne basecoat designed for spot, panel and overall repairs. It features best-inclass metallic flake control for outstanding blending performance and reliable quality for basecoat repairs in solid, metallic, pearl and special-effect colors. The products referenced herein may not be available for sale in your market. Please consult our distributor for product availability.




PHYSICAL PROPERTIES

Max.VOC

722 g/L

Viscosity

15-17 seconds in a Zahn#2 cup

Avg.Wt.% Volatiles

82.7%

Avg.Vol.%Exempt Solvent
11.4%
Avg.Wt.%Exempt Solvent

10.3%

Recommended Dry Film  Thickness0.5-2.0 mils

Mix Ratio 

(by volume)

1K basecoat:1 parts

Thinner(RC-X110,RC-X111,RC-X112):0.3-0.5 parts

Packaging

1L x 12 tins/ctn, 4L x 4 tins/ctn

Shelf Life

5 years

DRYING TIMES

AIR DRY

Flash before clearcoat      15-30 minutes

Flash before tape: 30 minutes

Flash before Two-Toning: 30 minutes

Maximum Allowable Dry before Clearcoating:   24 hours.


FOR DRY

Not recommended


DETAIL IMAGES

家族照.jpg

Burn Out Blue Metallic_副本.jpg

CTV 1L 增彩.jpgCTV 1L P.JPGCTV COMBO.JPG

Application

SUBSTRATES

2K Epoxy primer RC-D505

2K Primer Surfacer RC-D480

1K Primer RC-D400

SURFACE PREPARATION

Prepare all surfacers to be repainted using the recommended undercoat systems,following recommended procedures.Finish sand with P400 DA grit paper or finer(dry or wet).

GUN SETUPS

HVLP

Siphon Feed:1.4mm-1.6mm

Gravity Feed:1.4mm-1.6mm

AIR PRESSURE

Siphon Feed:30-40 psi at the gun

Gravity Feed:25-35 psi at the gun

APPLICATION
Apply 2-3 medium coats until hiding and color match are achieved.Flash 5-10 minutes between coats.

TIPS FOR SUCCESS


Use mixing stick for accurate measurements.

Use activated basecoat within 2 hours for optimum performance.

Do not use activated basecoat after the 2.5 hours pot life.

If fish eyes occur,allow the basecoat to dry thoroughly and then apply dry coats of base color to bridge the affected area.

Do not add accelerator to activated basecoat. It will not speed cure and could damage filim properties.


OUR FACTORY


OUR WORKSHOP

Jinwei Refinish supplies high quality car paint colour mixing system ranging from LOW VOC, High solid Low viscosity Tinting System, conventional acrylic systems to accessory products such as primers, surfacers, base coat, top-coat, clear coat,  hardener, thinner, and ancillary materials etc., We are able to provide more competitive and cost effective color mixing system than comparable systems on the market.


EXHIBITION


2017 Automechanika Dubai




PACKING & DELIVERY

HTB1mcTgXbSYBuNjSspfq6AZCpXaU_看图王.jpg



BENEFITS WE OFFER

1.We value every inquiry sent to us and ensure a quick competitive offer. If you order to us, we can promise the quality.
2.We put your order into our tight production schedule to ensure you punctual delivery time and send shipping notice to you as soon as your order is shipped. We respect your feedback after you have received the goods. 

3.Because we have more than 10 years of experience in car refinish paint production, all our products conform to national standard! We can promise an excellent service and a prompt delivery! Your order is welcome at any time!


FAQ

Q1. Do you charge for the samples?
A: According to our company policy, the samples are free, we only charge the freight. And we will return the freight if you set the order .

Q2. Can you produce the product according to customer's requirement?
A: Sure, we are professional manufacturer, OEM is welcome.

Q3. What about the quality?
A: We can provide you samples for quality inspection. If you order to us ,we must promise the quality , if some quality problem happened, we can have a negotiation of the compensation and sign agreements ,and our after-sales department will perform the duties as the agreements.


Q4. What is your terms of packing?
A: Generally, we pack our paint in good sealing tins and brown cartons.


Q5. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages 
before you pay the balance.

Q6. What is your terms of delivery?
A: EXW, FOB, CFR, CIF.

Q7. How about your delivery time?
A: Generally, it will take 7 to 14 days after receiving your advance payment. The specific delivery time depends 
on the items and the quantity of your order.

Q8. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. 

Q9: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, 
no matter where they come from.




If you want the matting agent for painting a car, welcome to buy the quality products made in China with our factory. As one of the professional manufacturers in China, we will offer you quality products with low price. Consult the quotation with us now.

Hot Tags: matting agent for painting a car, China, factory, manufacturers, quotation, low price, made in China


If you want the base coat painting, welcome to buy the quality products made in China with our factory. As one of the professional manufacturers in China, we will offer you quality products with low price. Consult the quotation with us now.
Hot Tags: base coat painting, China, factory, manufacturers, quotation, low price, made in China
Inquiry