2K Topcoat For Car Refinish
Roch RC-S series auto refinishes is considered by many leading domestic and foreign carmakers for its excellent color matching through the Color Bank System. Roch is committed to achieving full customer satisfaction through establishing a separate plant and technical center as well as...
Two-pack acrylic polyurethane for commercial vehicles, passenger cars and equipment. For new work and repairs. Dynacoat 2K Topcoat has been designed to get high gloss and resistance.
PRODUCTS AND ADDICTIVES
ROCH 2K Topcoat S series
ROCH Hardeners Fast / Medium / Slow
ROCH Thinners Fast / Medium / Slow
Acrylic resin, CAB, pigment, solvents, addition agents
All kinds of colors. For detailed information please refer to Roch® Tinters in the catalog
2K paint: 2 part
Thinner(RC-X110, RC-X111, RC-X112): 0.3~0.5 parts
|Pot Life||48 hours@20℃|
Spray Gun &
|2-3 single coating to coverage (volatilization time of each layer: 15-20 minutes)|
|Drying Time||Clearcoat can be sprayed within 15 minutes to 5 hours|
Before spray: P600-800 by dry sanding
After spray: P1000 by wet sanding
|Substrate||OEM paint, Roch® brand primer surfacer|
|Thermal plasticity acrylic paint or alloy base coat|
1L x 12 tins/ctn, 4L x 4 tins/ctn
THE SMART SOLUTION
ROCH S Series is sufficient to shake the required tinter just shortly before dosing. As a consequence storage in common shelves at constant temperature is sufficient. The tin sizes have been selected according to the usage and therefore high storage costs and expired shelf lives will be avoided. Due to paint-in-paint mixing without any binders, activators or other additives custom made mixouts for smaller surfaces are possible. Easy application For mixing and finding formulations as well as for using the color documentation or spectrophotometer no changes in the way of working are necessary
The application of ROCH is possible with standard spray booths and common spray guns. Left overs are usable for a long time, cost for waste, disposal is declining.
Colour- and product reliability
By adding 10-20 % ROCH-Thinner as the only addition to the top tinters the viscosity is adjusted ready to spray. The addition within very narrow limits and without any other additives increases the safety in use of the product. The colour can be immediately judged during the application. Because of the high thixotropy of the top tinters the danger of colour differences caused by insufficient stirring is avoided completely. Therefore colour shades are achieved easily and safely with an immediate possibility to judge them on the object.
Highest efficiency + Covering power = Time savings
ROCH S series covers already with the first coat. Usually the second coat only serves the effect adjustment and the perfection of the colour.
In spite of the slower drying times of other oilbased systems in general therefore the total duration of coatings can be reduced. The material consumption is at minimum 25 % less compared with conventional systems.
Economic environmental protection
Because of the low emmissions of organic solvents of ROCH, which are significantly lower than the presently valid and even the possibly coming legal limits, the overal emmissions in a body shop are reduced by a large part. This effective environmental protection in any way is achieved without any additional costs. Because of a possible higher image at customers or governments but also because of lower costs for air cleaning and waste disposal this even can lead to higher profits
For the use of ROCH topcoat Color System II serves as a help for finding and comparing colours. The colours are sorted by colour groups and with narrow differences between each other. Excellent application After the research by colour code therefore possible variants or colour differences caused by any other reasons compared to the original colour can be found quickly and safely in the Roch Color System. The search by Color-System-Number leads to a colour corresponding to the relevant colour chip in the system.
ROCH Series top tinters further products are available for car refinishing with perfect quality but also within the legal emmission limits for effective environmental protection.
2017 Automechanika Dubai
LOADING THE CONTAINER
PACKING & DELIVERY
BENEFITS WE OFFER
If you want the 2k topcoat for car refinish, welcome to buy the quality products made in China with our factory. As one of the professional manufacturers in China, we will offer you quality products with low price. Consult the quotation with us now.