Guangzhou Jinwei Chemical Co., Ltd

Automotive Refinish Paint One Stop Supplier. Professional Team, Perfect Service!

Car Paint Shop

Car Paint Shop

2K Paint RC-Pearl Paint series High quality, two or three layers basecoat system with metal colour basecoat for high class cars and commercial vehicles. 1.The result will be perfect if the users use Roch® brand supporting thinners. 2.Light...

Send Inquiry
Product Details

Jinwei Champagne Metallic Basecoat Paint adds the superior durability of urethane to the ease of conventional basecoats for professional car paint shop


Apply a durable urethane finish for global market

Choose a fast, medium or slow Low-VOC reducer

Makes 5 sprayable quarts

Clearcoat is required on basecoat paints

Basecoat Paint Kit is a low-VOC system, so it meets regulatory limits in highly-regulated areas, eliminating the need to switch to a waterborne system.



PHYSICAL PROPERTIES

Specific Gravity0.98-1.01KG/L
Viscosity140-180S
IngredientsAcrylic resin, CAB, pearly-lustre pigment, addition agent, solvents
ColourAll kinds of metallic pearlescent colours. For detailed information please refer to Roch® Tinters in the catalogue

PROCESS

Mix Ratio (by volume)

2K Solid paint: 2 parts

Hardener(RC-G221,RC-G222,RC-G223):1 part

Thinner(RC-X110,RC-X111,RC-X112): 0.3~0.5 parts
Pot Life2.5 hours@20℃
Spray Gun & Air PressureGravity type: 1.2~1.5mm, 4Pa
Suction type: 1.4~1.6mm
Spray Method2-3 single coating to coverage (Flash off time of each
layer:15 to 20 minutes)
Drying TimeVarnish can be sprayed within 15 minutes to 5 hours
SandingBefore spray: P600~P800 by dry sanding
After spray: P1000 by wet sanding
SubstrateOEM paint、Roch® brand primer surfacer
Unapplicable
Substrate
Thermal plasticity acrylic paint or alloy base coat
Packaging1L x 12 tins/ctn
Shelf Life5 years

aPPLICATION INSTRUCTIONS

TOPCOAT PAINT MIXING RATIOS

Thoroughly mix four parts Low-VOC Urethane Top coat with one part Low-VOC Urethane Hardener. Use Fast (RC-G221) for small jobs, or temps below 25°C; Medium (RC-G222) for small jobs, or temps between 21-30°C; or Slow (RC-G223) for large jobs, or temps above 30°C. Keep in mind, other factors, such as humidity, air flow and total film thickness should also be considered. In many situations, it will be useful to add 10%-20% RC-X110 Zero-VOC Reducer to aid sprayabliity, flow and leveling. Remember, this is an activated basecoat system; only mix as much as is needed. Pot life is about 2 hours at 20°C. 


PAINT GUN SET-UP 

HVLP Gun: Fluid Tip 1.2-1.4 mm Inlet Spray Pressure 8-10 psi 

Conventional Gravity: Fluid Tip 1.2-1.5 mm Inlet Spray Pressure 40-50 psi 

Conventional Siphon: Fluid Tip: 1.3-1.6 mm Inlet Spray Pressure 40-50 psi 


APPLICATION INSTRUCTIONS

Apply Low-VOC Urethane Top coat color in two full medium wet coats with a consistent 50% overlap pattern. Allow five to ten minutes flash time between coats. Flash time should increase if additional coats are applied. Most colors will cover in two coats. A third and final coat may be applied to set even metallic pattern. If required, apply this light coat immediately after the previous full wet coat, moving the gun with faster passes, from further away. Mist Top coat onto the wet film until the metallic pattern is uniform. 


Top coat should dry dust-free within 10-20 minutes. May be lightly sanded in as few as 20 minutes. Wait at least 30 minutes before wet sanding. Wait 45-90 minutes before taping on the fresh film. All dry times are approximate, at 20°C. Temperature, air flow, total film thickness and other variable may extend these times



bENEFITS WE  OFFER

Help customers achieve their goals while driving productivity from the front of the body shop to the back. For coatings systems engineered for easy, quick and accurate application. For localized business and marketing support solutions. And for pragmatic innovations that simplify and expedite the refinish process. 

With our products and support, we help body shops focus on driving their businesses forward.


blob.png


blob.png


blob.png


SAFETIES

Always wear appropriate eye, skin and respiratory protection. Consult MSDS for specific precautions and warnings .VOC = 3.5 lbs./gallon..


PRECAUTIONS

1.The result will be perfect if the users use Roch® brand supporting thinners.

2.Light pearlescent paint should be spray with RC-9000, RC-8000 or RC-3000.

3.The basecoat must keep dry before spray the finish coat, otherwise the blisters will appear.


1.jpg


If you want the car paint shop, welcome to buy the quality products made in China with our factory. As one of the professional manufacturers in China, we will offer you quality products with low price. Consult the quotation with us now.
Hot Tags: car paint shop, China, factory, manufacturers, quotation, low price, made in China
Related Products
Inquiry