Collision Auto Body Color Repair
1K basecoat High quality,multiple layers basecoat system with metal colour basecoat for high class cars and commercial vehicles. 1.The result will be perfect if the users use Roch® brand supporting thinners. 2.Light...
Roch Basecoat Solvenborne
ROCH RC-M and S series are designed to produce solid, pearl and metallic colors. It has excellent drying properties and can be used for small repairs up to complete resprays.
Acrylic resin, CAB, pigment, solvents, addition agents
All kinds of colors. For detailed information please refer to Roch® Tinters in the catalog
1K paint: 1 part
Thinner(RC-X110, RC-X111, RC-X112): 0.7~1 parts
|Pot Life||48 hours@20℃|
Spray Gun &
|2-3 single coating to coverage (volatilization time of each layer: 15-20 minutes)|
|Drying Time||Clearcoat can be sprayed within 15 minutes to 5 hours|
Before spray: P600-800 by dry sanding
After spray: P1000 by wet sanding
|Substrate||OEM paint, Roch® brand primer surfacer|
|Thermal plasticity acrylic paint or alloy base coat|
1L x 12 tins/ctn, 4L x 4 tins/ctn
Metallic and pearl colors:
Apply one single coat, allow flash off until the coat is completely dried (matt). Apply a following lighter coat till covering is achieved. If necessary , finish with a mist coat by reducing the working pressure with 0.5 bar at the air inlet and increase the distance between spray-gun and object.
Apply one full single coat. Allow flash off until the coat is completely matt. Apply another single coat and again allow this coat to flash off until matt, repeat until covering is achieved, a mist coat is not needed with solid colors.
Spot and fade-out repair:
Apply the basecoat in thin (overlapping) coats with the spray gun fully triggered at a spraying pressure of 1.5-1.8 bar until opacity is achieved. Allow to flash off until matt between coats, than fade out twice into remaining area (only metallic colors), using a spraying pressure of 1.5 – 1.8bar.
-Metallic toners must be stirred thoroughly before using for the first time
-While making a spot repair, it’s not necessary to tag-rag between coats
-Apply a full coat of pure 7000 as a first coat for a better orientation of the metallic
-With metallic 50% of pure 7000 can be added to the final (drop)coat
-Do not apply to heavy coats while making a spot repair
-Jinwei Basecoat oilbase is in principle ready for use Addition of Activator is possible for:
- adjusting the viscosity of light metallics - avoiding overspray while painting larger objects
- painting in warm and/or dry conditions (low RH) Mixed colors must be stirred thoroughly directly after mixing, prior adding Activator
- If a pure Basecoat oilbase metallic mixing color will be applied, always add Basecoat oilbase tinter RC-X111 in a mixing ratio 1:4 (1part Metallic :4 parts RC-X111)
- Adding 5% of Additive Long Potlife increases the potlife of metallics up to 3 months
- Clean spray gun with waterborne Guncleaner directly after use
Per coat: 10-20 µm
Recommended application (2 coats): 20-30 µm
Ready for use mixture at recommended layer thickness per coat 7.5 m²/liter
The practical coverage depends on many factors i.e. shape of the object, roughness of the surface, application method and application circumstances.
2017 Automechanika Dubai
lOADING THE CONTAINER
PACKING & DELIVERY
BENEFITS WE OFFER
If you want the collision auto body color repair, welcome to buy the quality products made in China with our factory. As one of the professional manufacturers in China, we will offer you quality products with low price. Consult the quotation with us now.